Roof trim problem

08-24-2016, 10:06 AM

The trim between the wall and the roof is separating. See photo. Is there a remedy?

**Kidkraz** · 08-24-2016, 01:29 PM

Jay,

Unfortunately I don't have a ready answer for you, but I'm curious. Is the trim pulling away from the wall, or is the wall pushed in? If the trim is bowed that should be an easier fix verses the wall being pushed in. Can you put a long level or straight board agaisnt the wall to see how far it's moved?

08-24-2016, 01:48 PM

The wall looks level - see photo

**Kidkraz** · 08-24-2016, 01:53 PM

Can you turn the level 90 degrees, so the long side goes from the tounge to the bumper?

**Kidkraz** · 08-24-2016, 02:02 PM

Jay, forgive me here, I should have asked another question before sending. Can you get to the top of that trim peice and is it inplace or has it seperated also? If your camper is open does it look pushed in from the inside?
I looked at my roof and that piece is sealed tight on mine, but that doesn't mean the adhesive hasn't failed on yours.

08-24-2016, 02:09 PM

Also looks level. See photo. Used 4 foot level. No air is showing underneath.

08-24-2016, 02:12 PM

I have EternaBond seal tape on the top. Hoping I don't have to remove. I'm OK if that helps solve the problem.