|
11-29-2014, 05:45 PM
|
#1
|
Senior Member
Join Date: Mar 2014
Location: Mesa, Arizona
Posts: 98
|
Fitting TM in Carport
Forum Members, Looking for some comments here. I am planning to purchase a TM 2720QS next year, but I've run into a small problem. I did a test fit on Tuesday to see if the TM would fit in my covered Carport, it does fit, except as you can see in the picture how steep the apron is, and the bottom of the holder for the Horizontal Tanks catches on the top of the apron.
My idea is to; 1) get a step hitch and switch out the WDH when needed so I can raise the TM 2 or 3 inches when I store the TM in the Carport.
Number; 2) put a Dolly Wheel on the tongue adjustment post, and let it adjust the tongue height as I'm backing the trailer in.
If I can't fix the problem and I have to store it somewhere else. I'll I have to do that and then I might as well look into getting the new TM RISE.
|
|
|
11-29-2014, 07:06 PM
|
#2
|
TrailManor Master
Join Date: Apr 2014
Location: Orlando
Posts: 2,796
|
Pavers ? Air lifts for the TV ?
__________________
Looking for a 24/17 in or near Florida.
|
|
|
11-29-2014, 07:14 PM
|
#3
|
Senior Member
Join Date: Mar 2014
Location: Mesa, Arizona
Posts: 98
|
TM in Carport
Padgett, Park Management won't allow it, we live in a retirement park, and you can't modify without permission and they won't give it.
That's what the Riser hitch would accomplish, isn't it the same thing as air lifts?
|
|
|
11-29-2014, 07:22 PM
|
#4
|
TrailManor Master
Join Date: Jun 2013
Location: NE Ohio
Posts: 662
|
Riser hitch would work for the placement then switch back for your tow set up.
__________________
2012 Chevy Traverse 2009.5 TrailManor 2720 with cassette toilet modification. Cat scale weight 3980 lbs. full tanks
"Retractable hard side camper", way more than a pop up
2020 has 28 nights reserved and planning more.
|
|
|
11-29-2014, 07:34 PM
|
#5
|
Senior Member
Join Date: Mar 2014
Location: Mesa, Arizona
Posts: 98
|
TM in Carport
TrailmanorMan, that's what I was thinking also.
|
|
|
11-29-2014, 08:57 PM
|
#6
|
Site Team
Join Date: Feb 2003
Location: The mountains of Scottsdale, AZ, and the beaches of Maine
Posts: 10,112
|
I have the same problem when backing my boat trailer into the boathouse at the end of the season. My solution was to go to WalMart, buy a solid hitch with a 3" drop, and a 2" ball to go with it. About $16 total investment. When it comes time to back the trailer in, just insert the hitch into the tow vehicle's receiver upside down, so it has a 3" rise, and reverse the ball. No need to tighten the nut more than hand-tight. Works like a charm.
If a 3" rise is too much, causing the rear bumper to scrape as you start up the ramp, try something smaller. You probably don't need more than an inch or two of rise.
I think this is what Trailmanorman suggested, too.
Bill
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 10:34 AM.