If it fits (13-1/4 inch x 10-1/2 inch overall size), installation should be easy since it is a drop-in with no faucet openings. This means that you won't be changing the faucets, so be sure there will still be space for them.
I note that it calls for a 1-1/2 inch drain. Most bathrooms, including TM, I think, use 1-1/4 inch plumbing, so you may need a reducer. That should not be a problem, since they are commonly available in the plumbing department of a hardware store or big box store.
If you do this change-out, you might want to install it with one of the Hepvo straight replacements for the RV P-trap, to save space under the sink. Less than $30 at Amazon.
https://hepvo.com/
I've been curious about how well these work. Installation looks easy. The Hepvo device accepts 1-1/2" inlet pipe, and a reducer to 1-1/4" at the output of the device is included with it.
Bill
Heng's 20337 10" x 13" Stainless Steel Oval Sink
Linear Mode
