|
|
11-22-2015, 06:11 AM
|
#11
|
Senior Member
Join Date: Jan 2015
Location: Colorful Colorado
Posts: 169
|
Quote:
Originally Posted by Craigrrr
Thanks, is there a minimum weight WDH I should look for, I have seen this listing on craigslist. " EZ LIFT WEIGHT DISTRIBUTION HITCH WITH ANTI SWAY BAR BRAN NEW IN THE BOXES. 6K , 8K , 10K MODELS LET ME KNOW WHAT YOUR NEEDS ARE.
EZ-LIFT HAS BEEN MAKING THESE SINCE 1953. THE ORIGINATOR. $300 NO OFFERS TAKEN OR EVER ACCEPTED AT THAT PRICE SO PLEASE DONT ASK. NEW IN THE BOX. "
just wonder what one I should get?
Also on a 1996 TM 3023 what size ball should I have on this hitch? thanks very much
|
__________________________________________________ _______
Does that price include shipping/tax?
Does your TM seller (is it a RV dealer?) have one that he wants to sell/set up?
Have a brake controller?
|
|
|
11-22-2015, 07:40 AM
|
#12
|
TrailManor Master
Join Date: Apr 2014
Location: Orlando
Posts: 2,796
|
Also consider that a WDH transfers force onto the trailer axle. Do you have 5 bolt wheels (3500 lb axle) or 6 bolt (5000 lb axle).
My 2720SL with the batteries in the back has a tongue weight of 460 lbs. However since I feel my 3500 lb axle is at or near its limit I do not want to transfer any more force on it.
__________________
Looking for a 24/17 in or near Florida.
|
|
|
11-22-2015, 12:27 PM
|
#13
|
TrailManor Master
Join Date: Jan 2014
Posts: 893
|
I think we need to think about the physics behind WDHs lest we over-estimate their effect. We can conservatively estimate that all of them are exerting less than 300 pounds of torque. After all, we crank them up by hand using relatively short levers. We have about a 3 foot lever arm between the hitch ball and the WDH brackets. Our lever arm from the hitch ball to the trailer axle is about 15 feet. With a lever arm ratio of 3:15 we can estimate 60 pounds at the trailer axle.
A WDH moves the center of pressure from the tongue weight forward of the rear axle, if it's working correctly. But I am not convinced they move it very far forward of the rear axle.
And I am less convinced that some of them work at all.
|
|
|
11-22-2015, 04:10 PM
|
#14
|
TrailManor Master
Join Date: Oct 2011
Location: New Braunfels, Texas
Posts: 919
|
Quote:
Originally Posted by Craigrrr
Shebantam, I have used an anti sway on the popup and found it to be a great feature to have. Since I will be going 2100 miles to pick up this gem I think I will do a WDH just for peace of mind. I came up with this one, so if anyone can say yay or nay to this WDH please respond I will order this type .
http://smile.amazon.com/Eaz-Lift-480...ributing+hitch
|
You've offered a lot of spec for the truck but the one i missed is the hitch weight? What is your maximum hitch weight with and w/o a WDH?
__________________
rvcycleguy
TM-2002 3124KB
TV-2003 Toyota Tundra V8 4.7L. Fact. Tow Pkg, air bags
2006 Suzuki Boulevard C50c Motorcycle- crashed- parted out
1956 Royal Enfield Bullet 500 Motorcycle-sold
2006 Harley Road King
|
|
|
11-22-2015, 04:28 PM
|
#15
|
TrailManor Master
Join Date: Oct 2011
Location: EAST TENNESSEE
Posts: 699
|
Craigrrr
have run both was , but with current set up,i do run a wdh, I do load hvy most of the time, but I also have the 6 lug wheels and the 5k axle,on our tm, so that helps, and our wheelbase is close to your rig. I think our bars are 750 lbs and is more than enough .
__________________
[SIGPIC][/SIGPIC]
RANDY & VICKIE
2003 3124 KS
TV 02 AVALANCHE 2500 4X4 8.1L
W/ PRODIGY B.C.,MAXXIS 10 PLY,HONDA 3000I
TM HISTORY
(88) TM 25 KING, (91) TM 23,(98) 3023, (03) 3124KS
|
|
|
11-22-2015, 05:15 PM
|
#16
|
TrailManor Master
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
|
Thanks all, I did pick a WDH up locally today New for $ 167.00 it is rated at 1000 pound tongue weight and 10,000 pound max trailer weight. I looked at the old specs for a 3023 said tongue weight was 395 # and I figured after loading and extra stuff for picking it and having the " just in case" with me. I got the 1000 pound rated unit. . HillbillyHotel, I see you have an older 3023 listed in your sig. can you tell me what the level height of the trailer is so as I can possibly be a little bit assembled and ready to go , as I am picking this up in Michigan and I hear it is Cold there Plus one other question for older trailmanor owners ......Are the stabilizers on this unit like the newer ones where you can actually crank up the trailer to level or are they just for stabilizing the trailer? I have a bal leveler for single axle trailers I am going to bring along also, would that work and raise up one side if it is uneven?
thanks very much
|
|
|
11-22-2015, 05:20 PM
|
#17
|
TrailManor Master
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
|
Quote:
Originally Posted by rvcycleguy
You've offered a lot of spec for the truck but the one i missed is the hitch weight? What is your maximum hitch weight with and w/o a WDH?
|
I have no idea, I guess I am not familiar with all the terminology just yet, Been driving a Class A for years and never had to worry about towing anything behind it, downsized to a popup a few yrs back, but now want to go a bit larger in trailers and have gotten used to the low profile of the popup. Thus the trailmanor fills the bill. Sorry for not knowing
|
|
|
11-22-2015, 06:18 PM
|
#18
|
TrailManor Master
Join Date: Apr 2012
Location: Centennial, Colorado
Posts: 885
|
I don't use my stabilizers to do hard-core leveling. I used blocks to get level side-to-side, and the tongue jack to level front-to-back. If I need to fine-tune the side-to-side, the stabilizers are fine for that. It is minimal additional torque on the stabilizers.
I have never liked putting lots of force on stabilizers to level, as it seemed to torque the frame of my old popup. I just prefer to get it close with tires on the ground or block/Anderson/Bal levelers, then stabilize with the corner stabilizers.
On WDH, since you got a 1,000#, be careful to not put too much tension in the WDH. I have heard that an over-capable WDH can make the ride pretty harsh on some roads, if tightened too much. Do just enough tension to get the TV back to level.
|
|
|
11-22-2015, 06:56 PM
|
#19
|
TrailManor Master
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
|
Thanks LoveToCamp, It looks like the stabilizers on the 96 TM are just that , It does not look like they crank down , but pull out and then press a tab if they need to touch the ground. But maybe someone who has an older TM can verify that.
|
|
|
11-22-2015, 09:09 PM
|
#20
|
Site Sponsor
Join Date: Jul 2006
Location: Sunny Beaches of Los Angeles
Posts: 3,242
|
Quote:
Originally Posted by BrucePerens
I think we need to think about the physics behind WDHs lest we over-estimate their effect. We can conservatively estimate that all of them are exerting less than 300 pounds of torque. After all, we crank them up by hand using relatively short levers. We have about a 3 foot lever arm between the hitch ball and the WDH brackets. Our lever arm from the hitch ball to the trailer axle is about 15 feet. With a lever arm ratio of 3:15 we can estimate 60 pounds at the trailer axle.
A WDH moves the center of pressure from the tongue weight forward of the rear axle, if it's working correctly. But I am not convinced they move it very far forward of the rear axle.
And I am less convinced that some of them work at all.
|
Easy to test with certainty. Simply go to a scale and weigh all the TV and TM axles with the WDH attached and not attached.
Dave
__________________
2000 2720SL & 2007 3124KB
2005 Toyota Sequoia
Twin Battle Born 12v 100Ah LiFePO4 (BBGC2) batteries, 300W solar on rear shell, Link 10, Lift kit, Maxxis 8008 225 75/R15 E tires
|
|
|
|
|
Currently Active Users Viewing This Thread: 19 (0 members and 19 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|