2720SL Bathroom alignment

Even with trailer on level ground, I get an out of alignment condition with the bathroom walls between the front and rear joints and with the front wall and the trailer wall when pushed in place. Is there a guide on how to adjust for proper aligment?

[scrubjaysnest]

Need more details on this one. On ours the walls don't make a perfect alignment but with a little effort all latches can be closed.

[rvcycleguy]

sometimes for me, not the shower curtain, but the bathroom valance gets out of position and can prevent the side folding door being raised completely. I know when it happens when my rear overhead lights won't work due to the switch is not being depressed by the bath wall.

Definitely need more information. The 3326 has to be the pickiest of the TMs about this and I don't remember having that problem...

[HIKERZ]

At times we will have a piece of trim come loose and cause it to bind

[Bill]

Originally Posted by rvcycleguy

sometimes the bathroom valance gets out of position and can prevent the side folding door being raised completely.

If there is a hand towel on the towel ring beside the kitchen sink, it can bind as the wall is raised.

But I'm thinking that these are pretty obvious problems, and happen only occasionally. If you have an every-time problem, we do indeed need more info about it. As always, a pic would be nice, showing where the misalignment occurs, and how much. BTW, are all the hinge screws tight in the wood?

Bill

Make sure the bed is all the way open and latched to the wall. If not, the back wall will not be vertical.