TrailManor Owner's Forum  

Go Back   TrailManor Owner's Forum > TrailManor Technical Discussions > How to and Modifications
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 03-22-2016, 07:48 AM   #31
Craigrrr
TrailManor Master
 
Craigrrr's Avatar
 
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
Default

Thanks Klpauba
__________________
Craig
One of the unknown ex-presidents


2008 2720SD
2008 Toyota Sienna XLE
2015 Prius v the money saver
Craigrrr is offline   Reply With Quote
Old 03-22-2016, 07:50 AM   #32
Craigrrr
TrailManor Master
 
Craigrrr's Avatar
 
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
Default

Quote:
Originally Posted by Kidkraz View Post
Craig, I removed my locking levers and use the heavy duty 3M Scotch All Weather Fastener Velcro to keep my cover secured. In fact when I went to Custom RV for a tune up they installed a set for me and I removed them once I got back home. It was easy and cheap.


Would this be the correct item: http://www.amazon.com/Scotch-All-Wea.../dp/B00347A8EO

Could you post a picture as to where you placed them? thanks
__________________
Craig
One of the unknown ex-presidents


2008 2720SD
2008 Toyota Sienna XLE
2015 Prius v the money saver
Craigrrr is offline   Reply With Quote
Old 03-22-2016, 12:00 PM   #33
Kidkraz
Site Sponsor
 
Kidkraz's Avatar
 
Join Date: Mar 2013
Posts: 1,086
Default

Craigerrr, you would be correct. I removed the tabs cause the cover would always get caught when I went to remove it to get access in the storage area. I covered the hole with some flexible caulking to prevent water from getting into the hole and painted over with black paint.
I wasn't worried that the cover would come off while going down the road either. The back shell keeps a good hold on the front of the cover and the Velcro on the back just really keeps it from bouncing around. As you can see I didn't use a big piece. I cleaned the surface and just as an added precaution wiped it with some alcohol to make sure there was no oily residue for a good bond.
Attached Thumbnails
Click image for larger version

Name:	Back bumper velcro curb.JPG
Views:	608
Size:	145.9 KB
ID:	13111   Click image for larger version

Name:	Back bumper street side velcro.JPG
Views:	584
Size:	123.4 KB
ID:	13112  
__________________
2013 2619
80 watt solar panel/swing hitch/low profile A/C.
Enduro 4445 caravan mover
2016 Dodge Ram 1500 V8 Hemi
Installed powered folding tow mirrors

Stopped playing with airplanes, now I just enjoy watching them fly by.
Kidkraz is online now   Reply With Quote
Old 03-22-2016, 02:39 PM   #34
Craigrrr
TrailManor Master
 
Craigrrr's Avatar
 
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
Default

Thanks Kidkraz,

I know first hand now that plastic cover will not fly off on the highway as I drove off today trying the new bike rack out and forgot I did not have anything holding it down, plus today is very windy too.

I think the velcro will work just fine as you stated the back shell holds it down real well.

I did not even put on the WDH and it drove nice no sway Glad I did it this way.
Attached Thumbnails
Click image for larger version

Name:	TM bike on rack 001.JPG
Views:	590
Size:	878.2 KB
ID:	13113   Click image for larger version

Name:	TM bike on rack 003.JPG
Views:	611
Size:	990.2 KB
ID:	13114   Click image for larger version

Name:	TM bike on rack 005.JPG
Views:	613
Size:	778.7 KB
ID:	13115   Click image for larger version

Name:	TM bike on rack 006.JPG
Views:	584
Size:	724.7 KB
ID:	13116  
__________________
Craig
One of the unknown ex-presidents


2008 2720SD
2008 Toyota Sienna XLE
2015 Prius v the money saver
Craigrrr is offline   Reply With Quote
Old 03-09-2018, 06:33 PM   #35
Imfrugal24/7
Member
 
Join Date: Mar 2018
Posts: 5
Question Receiver hitch 2" for rear of trail manor

I would like to know if a receiver hitch can be attached to the rear of my trail manor and if so are there any that bolt on, trail manor factory placed holes, set for a specific hitch or is it going to need to be welded in place.

I have seen the work folks have gone to to mount over the propane tanks and that a bit much.

My goal is to attach my 250cc apx 300lbs .


Let me know

Thank you
Imfrugal24/7 is offline   Reply With Quote
Old 03-09-2018, 10:27 PM   #36
Craigrrr
TrailManor Master
 
Craigrrr's Avatar
 
Join Date: Oct 2015
Location: Sunny Arizona
Posts: 751
Default

You can use something like this " https://smile.amazon.com/dp/B0007VDR..._t1_B0033WNJV4 "

and bolt it on and weld it on, cut out the original section of the TM bumper as it is so thin anyway and mount this in between the steel frame on each side...NOTE***** I am not saying this is the specific one for your TM, but an adjustable hitch mount is what I used for mine.
Attached Thumbnails
Click image for larger version

Name:	TM receiver hitch installed 006.JPG
Views:	759
Size:	757.0 KB
ID:	16615   Click image for larger version

Name:	TM receiver hitch installed 008.JPG
Views:	786
Size:	783.2 KB
ID:	16616   Click image for larger version

Name:	TM bike hitch done 003.JPG
Views:	722
Size:	902.5 KB
ID:	16617  
__________________
Craig
One of the unknown ex-presidents


2008 2720SD
2008 Toyota Sienna XLE
2015 Prius v the money saver
Craigrrr is offline   Reply With Quote
Old 03-10-2018, 07:26 AM   #37
ShrimpBurrito
Site Sponsor
 
ShrimpBurrito's Avatar
 
Join Date: Jul 2006
Location: Sunny Beaches of Los Angeles
Posts: 3,278
Default

I’m not sure th factory has issued any weight rating for the rear bumper, but the consensus here has been that anything exceeding the weight of a bicycle or two (ie 100 lbs combined weight of rack, hitch, and bikes) is not recommended. A 300-lb motorbike, especially when the moment arm of the rack will increase that number — most definitely not.

Dave
__________________
2000 2720SL & 2007 3124KB
2005 Toyota Sequoia
Twin Battle Born 12v 100Ah LiFePO4 (BBGC2) batteries, 300W solar on rear shell, Link 10, Lift kit, Maxxis 8008 225 75/R15 E tires
ShrimpBurrito is online now   Reply With Quote
Old 03-10-2018, 10:14 AM   #38
Larryjb
TrailManor Master
 
Join Date: Nov 2016
Location: Vancouver BC
Posts: 1,530
Default

Quote:
Originally Posted by ShrimpBurrito View Post
I’m not sure th factory has issued any weight rating for the rear bumper, but the consensus here has been that anything exceeding the weight of a bicycle or two (ie 100 lbs combined weight of rack, hitch, and bikes) is not recommended. A 300-lb motorbike, especially when the moment arm of the rack will increase that number — most definitely not.

Dave
I assume this is a spec for mounting a receiver on the rear bumper itself. It appears that Craig mounted his receiver directly to the TM frame. I assume that would significantly increase the weight rating.
__________________
Larry

2002 Tahoe
2008 4.6 Explorer
2001 2720SD

Various TM images that you may or may not find elsewhere:
http://www.trailmanorowners.com/forum/album.php?u=11700
Larryjb is online now   Reply With Quote
Old 03-10-2018, 04:46 PM   #39
inghamm
Site Sponsor
 
inghamm's Avatar
 
Join Date: Mar 2015
Location: Everett, WA
Posts: 214
Default 300 lb on the rear of the TM too much

I think ShrimpBurrito is right. The 100lb spec is for the hitch receiver that TM put on the trailers, mounted to the frame. I bought mine from a TM owner that didn't want it any more. You can probably order one from the factory. But 300lb is going to be too much. I would think that would dynamically change the towing characteristics as well, with that much weight that far back.
__________________

TM: 2007 2720 (QB) TV: 2010 Toyota Highlander Hybrid
Hopkins INSIGHT brake controller, Andersen No-Sway WDH
CARCHET Solar Powered TMPS
Dometic CRX-1110 AC/DC Compressor Fridge, 200 W Solar
inghamm is offline   Reply With Quote
Old 03-10-2018, 05:41 PM   #40
tentcamper
TrailManor Master
 
tentcamper's Avatar
 
Join Date: Jan 2014
Location: Somerset, OH
Posts: 1,868
Default

300 lbs hanging behind the rear bumper is going to take around 200 lbs off the tongue weight. I would think if the tongue drops below 11-12% of the trailer weight there will be sway issues. The trailer is a big lever with the forum at the axle.

I have always thought the weight limit issue of 100 lbs by TM for the bike rack was a weight and balance thing and not a mechanical limit of the frame/hitch???

See the youtube trailer sway youtube sway
__________________
Art & Joyce
Current camper: Motor Home
Previous: 2009, 3023-QB and 2003 2720
tentcamper is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Urgent question about hauling a Trailmanor [email protected] Prospective Owner Questions 14 06-29-2013 09:49 AM
Bikes on Back? brulaz Exterior 31 06-11-2011 03:25 PM
Hauling Firewood KdHammonds General TrailManor Topics 17 11-30-2004 08:56 PM
Best way to transport bikes skypuff Exterior 1 04-22-2004 11:16 AM
bikes between vehicle/TM?... 2swans Exterior 6 04-04-2002 12:08 AM


All times are GMT -6. The time now is 05:54 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2022 Trailmanor Owners Page.