Pump Runs Continuously
I tested our pump and it does not seem to prime correctly. When I fill the freshwater tank - then turn on the pump it runs and does not build pressure. As a test, I turned off pump, connected TM to city water and built pressure, then turned off the city water and turned on the pump again. The pump stopped running like it should. This tells me I don't have a leak. If I open the faucet the water runs briefly then the pump starts up again with no pressure. I noticed a few drops of water under the pump. I am going to check the screen between the tank and pump, then take the pump apart. Any advice for me doing this? Thanks a million for your ideas!
|