Replace Bargman (Pollock) plug??

07-12-2003, 05:24 AM

Has anyone replaced the 7-prong plug on their TM? Any tips? Mine is molded on.

Would appreciate it if those of you who know would post the color codes by pin# on the TM side and the TV side of the umbilical cord connection.

What does each wire do? Thanks  :

Betty Ann

07-12-2003, 05:41 AM

Thanks Bill  ;D for your post under 12V failure. Your link answered the wiring code portion of this post.

http://home.maine.rr.com/billjeffrey...geman%20TM.jpg

Betty Ann

07-27-2003, 07:50 AM

I replaced my Bargman 7 connector earlier this season, mine was molded also.

Biggest tip- make sure you disconnect the battery before doing any work on the plug.

I cut off my old plug using a hack saw. New plug had screw connections. Experienced a bit of a problem with guage of wire, seemed to be bigger than new plug was designed for, but managed to make it work.

Since it appears you have the wiring diagram, I won't go into that.
Good Luck,
Carl