What is this called ?

[Padgett]

I need to order some of these brackets and hope is a standard part but have no idea what it is called. In TM catalog it is an 18090 Wall Plate but need this year.

Anyone know name or how to order from Amazon or Camper World ?

Thank you,

[HoMiPa]

Originally Posted by Padgett

I need to order some of these brackets and hope is a standard part but have no idea what it is called.

Thank you,

I'd be interested to know too! Before I ended up buying the z-clips for my valances, I tried to find those. But despite trying about 20 different searches using combinations of words like "cabinet hanging brackets" and "cabinet mounting hardware", and "heavy duty brackets" and "interlocking brackets", and "wall mounting plate set", etc., etc., etc. - I never found anything that looked even remotely like those - specifically looking for the wall mount portion to have mounting holes both above and below the area where the cabinet hangs.

[bobtater]

I know it's the cabinet hanging bracket but not sure you can find it on another site.
P.S> I looked too and didn't have any luck. It may be propietary to the company.

[commodor47]

It looks very much like an RV table Hinge Bracket Wall Plate:

http://www.dyersonline.com/ap-produc...all-plate.html

Dick

[HoMiPa]

Originally Posted by commodor47

It looks very much like an RV table Hinge Bracket Wall Plate:


Dick

Well, that certainly looks like it - but the only thing Dyers has for the other side is a hinge bracket. Also, pretty pricey. I think I'll stick to the z-clips I got - 20 in a package (for 10 pairs) for only $12, since I needed 20 pairs to do all 10 windows. But admittedly, I wouldn't want to hang anything too heavy on the z-clips I got.

[Padgett]

Thank you that seems to be it: AP Products 13959 Table Brkt Kit-Wall Plate. Are supposed to be two in a kit. I suspect that you can use the JR Products 10855 (2 ea) as a hook or just make some from flat stock.

[commodor47]

You are welcome. I assume my link to the part in question is what you are looking for and has the correct dimensions. Isn't that the same wall mount plate used for the TM hanging cabinet? If so, then the hook on the top, back of the cabinet should work nicely with the linked part.

Dick

[bobtater]

Pagett I found what your looking for right here. It's a table hinnge bracket.
https://accessories.lazydays.com/ap-...gaAkacEALw_wcB

[HoMiPa]

Originally Posted by bobtater

Pagett I found what your looking for right here. It's a table hinnge bracket.

WOO HOO! And they have the other half too, that would go on the back of the cabinet!

https://accessories.lazydays.com/ap-...013960-20-3715

[tentcamper]

The part use to be listed in te trailmanor factory parts list on factory website? It might still be there??