I don't use my stabilizers to do hard-core leveling. I used blocks to get level side-to-side, and the tongue jack to level front-to-back. If I need to fine-tune the side-to-side, the stabilizers are fine for that. It is minimal additional torque on the stabilizers.
I have never liked putting lots of force on stabilizers to level, as it seemed to torque the frame of my old popup. I just prefer to get it close with tires on the ground or block/Anderson/Bal levelers, then stabilize with the corner stabilizers.
On WDH, since you got a 1,000#, be careful to not put too much tension in the WDH. I have heard that an over-capable WDH can make the ride pretty harsh on some roads, if tightened too much. Do just enough tension to get the TV back to level.
|