I'm wondering if it could bent back?
Are the connecting joints that join the two halves aluminum?
One could brace the floor with 4x4's ( spread the weight ) as long as can be put inside
4x4 at the top inside maybe 10 inches long..... Jack and a post to stretch upward... Towells to keep scratches or scrapes... Possibly may have to put a strap around outside with cushion and boards to stop any other movement.
All that might work.... Or could make it worse...
Have to know what the connectors are made of. Since it bent.... I'm thinking its probably malleable.
__________________
:)2004 TM 3023 TV 1996 Silverado ext cab 3/4 ton 454 eng. Installed 12v 30 amp (Radio Shack) relay to cut power to TM when ignition switch is off.:) Swing away hitch. :)
|