View Single Post
Old 06-04-2009, 07:29 AM   #1
commodor47
Site Sponsor
 
commodor47's Avatar
 
Join Date: Jul 2006
Location: Blandford, MA
Posts: 1,045
Default Fiamma Awning Closure Issue

Our awning has not retracted properly for some time. I decided to take a closer look at situation and noticed at least two contributing factors. The leading edge of the awning (which I will refer to as the "outrigger") had a slight inward curve (bowed in towards the TM). This slight curve prevented the awning from retracting completely. The red tab nearest the entry did not retract indicating the awning was not locked securely. I could see the extra space along the bottom and top of the awning case get larger towards the TM entry end of the awning. The second factor is the alignment of the extension arm elbows (see attached pdf file). Also attached is a Word Document tutorial on the adjustments I made to correct the awning retraction issue.

Dick
Attached Files
File Type: doc Fiamma Awning Observations and Adjustments.doc (24.5 KB, 4285 views)
File Type: pdf Fiamma Awning Arm Adjustment.pdf (230.1 KB, 2025 views)
__________________
Dick & Jeri in Western MA
2003 2720 SL
2007 Ford Explorer Sport Trac Limited 4x4 - V8
Albums
commodor47 is offline