View Single Post
Old 03-23-2020, 07:32 AM   #7
rickst29
yes, they hunt lions.
 
rickst29's Avatar
 
Join Date: Aug 2005
Location: Reno, NV
Posts: 1,318
Default Yep, that's the one to use as a Parallax replacement.

Quote:
Originally Posted by Casey Freswick View Post
I have the same converter in my older TM as Nate. Was about to order the Wildcat you originally suggested, but it looks like I should get this one, http://www.bestconverter.com/PD-4655...nt-_p_676.html. I plan to upgrade to a lithium battery. Is that correct?
Yes, that is exactly the one I recommend as a Parallax replacement. Virtually the same as 'Wildkat', but perhaps a slightly newer design. (The 'Wildkat' is apparently a bit different, containing some programming or hardware changes added by it's maker, using the PD Board as it's "core". PD might currently incorporate most of those changes themselves, but that's a total SWAG on my part. )

Adding the "remote pendant" is handy, if you use a generator and want to force "boost mode" while the generator is running. It's not wireless or truly 'remote', it's attached into the main converter board by a cable. But it's easy to use, and it allows you to mount on the lower bathroom wall - so that you don't have to go digging into the converter box, and trying to playwith DP switches to accomplish that result.
__________________
TM='06 2619 w/5K axle, 15" Maxxis "E" tires. Plumbing protector. 630 watts solar. 450AH LiFePO4 batteries, 3500 watt inverter. CR-1110 E-F/S fridge (compressor).
TV = 2007 4runner sport, with a 36 volt "power boost".
rickst29 is offline   Reply With Quote