View Single Post
Old 12-07-2010, 07:08 AM   #2
brulaz
Guest
 
Posts: n/a
Default

Pat,

You are not alone.

Do a little search in this section and you will find that several of us who purchased early versions of the Elkmont have had similar problems.

Ours was returned to the factory where they completely re-caulked the roof area near the door and replaced/re-caulked the bath fan. They used a newer 3M polyurethane caulk (not-silicone) that seems to adhere to the shiny plastic bits much better. In my case there was an actual depression in the roof which they covered and caulked with a layer of plastic.

So far these repairs have worked well, and Ed was very helpful.

I do get the impression that Trailmanor is improving the Elkmont as they go along, but it was a new model, introduced at the beginning of the recession, and the company was going through some management changes, so the 2009 and early 2010 models do have more than their fair share of problems.

If you can find a good repair place, Trailmanor should help you out with the repairs.
  Reply With Quote