Putting the Eternabond on the roof of the trailer and the plastic trim on the front was what I was thinking about doing. That plastic trim has some holding power but not nearly what that Eternabond has. Today I pulled the plastic strip on the drivers side (the piece pictured) the rest of the way off and it actually came off pretty easy. It had a grey plastic/rubber/putty backing that while some of it stayed stuck to the trailer roof it was easily removed with just my finger nail.
Will keep all informed making sure to take some photos. Good idea.
Keeping it down is the easy part. I have some sand bags that should serve as perfect dead weight. I plan on using some masking tape along the edge so if some of the 3M 5200 oozes out it won't get on the rest of the trailer roof.
|