TrailManor Owner's Forum - View Single Post

**ShrimpBurrito** · 11-02-2018, 12:12 PM

I've used a tubing bender, and it was super easy, nearly fool proof, and inexpensive. Something like this:
https://www.amazon.com/Ion-Tool-3-in.../dp/B07BB1WPLF

Note that RVIA code, simply as a risk-reduction policy, stipulates that any line-to-line (not line-to-appliance) gas connection must not be in living quarters. So if you replace the line going to the range, I would replace it all the way through the floor to the union under the camper.

Dave

11-02-2018, 12:12 PM	#7
ShrimpBurrito Site Sponsor Join Date: Jul 2006 Location: Sunny Beaches of Los Angeles Posts: 3,239	I've used a tubing bender, and it was super easy, nearly fool proof, and inexpensive. Something like this: https://www.amazon.com/Ion-Tool-3-in.../dp/B07BB1WPLF Note that RVIA code, simply as a risk-reduction policy, stipulates that any line-to-line (not line-to-appliance) gas connection must not be in living quarters. So if you replace the line going to the range, I would replace it all the way through the floor to the union under the camper. Dave __________________ 2000 2720SL & 2007 3124KB 2005 Toyota Sequoia Twin Battle Born 12v 100Ah LiFePO4 (BBGC2) batteries, 300W solar on rear shell, Link 10, Lift kit, Maxxis 8008 225 75/R15 E tires