Thread: Inspection
View Single Post
Old 06-04-2010, 07:50 PM   #2
Wavery
TrailManor Master
 
Wavery's Avatar
 
Join Date: Jan 2022
Location: San Diego, California
Posts: 2,864
Default

Quote:
Originally Posted by Michael View Post
I understand that in 2003, Trailmanor started utilizing an aluminum shell frame. I have a friend who is contemplating a 2000 2720. How can they inspect for rot if it has a wood frame? Is it obvious visually?
We haven't seen many complaints about wood-rot in these frames. That doesn't mean that he shouldn't try to find some.....I'm just sayin'.......

The most obvious place to look for wood-rot would be in the lowest points of the upper shells. I don't know how the current owner would feel about him probing around with a screw driver but he could check latch and bracket mounting screws. Just see if the screw easily free-turns without gripping, while tightening the screw. If it does, pull out the screw and see if it has black residue on it. Even that test may only tell you that there is a small amount of wood rot it the screw hole though. However, if all the screws are tight and secure, that could be a good sign.

Check for water stains in the ceilings around the hatches and in the corners & seams. Also check the walls, especially around the windows. If there are water stains, that could be an indication of wood rot. Again, check the screws.

The bottom edge of the roof frame should be solid, if it feels spongy or bends easily, that could be an indication of wood-rot. Same with the floor.
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
Wavery is online now   Reply With Quote