Thanks for that post Dave. I think that I learned from it. I will be sure to dump our toilet before traveling.
I usually dump the toilet, holding tank and even the fresh water tank before towing. I see little up side to towing around all that weight. This is just one more reason to do it.........eeeeeeeew!!!!!!!
As for the table screws pulling out, get yourself some nut-serts. You drill a larger hole (about 3/8" I think) insert the elongated nut-sert, put in the screw and tighten it. That collapses the nut-sert flat inside the wall and puts a permanent threaded nut on the inside of the wall. What you see on the outside of the wall looks like a 1/4" washer. It should never strip. It's what they use for the brackets on the hanging cabinets. I can't imagine why they didn't use them on the table brackets.
Wayne
__________________
TrailManor Elkmont
640W solar- 230AH LiFeP04 Battery
|