Mounting solar panels
I mounted two 100 watt panels to the back of my trailer roof. The panels measure about 20" x 60". I cut two pieces of 1/16" thick aluminum into 3" x 20" pieces and glued them to the roof at both ends of the panel with Loc-tite Depends. I drilled 3 holes through the aluminum and into the roof, filled the hole with clear silicone, and installed jack nuts with 10-24 SS screws.
__________________
Harry Womack
2005 3124KB, 200 watt solar
1750 watt 120 volt inverter
Maxxis load range E tires @ 75 PSI
2013 1500 Suburban Z71 5.3 4X4 w/
Firestone air bags inside of springs.
Not using Trail Manor now. Replaced
with 2020 motorhome
|