Steve,
Look in the cabinet under the AC and you will see that the plastic drain hose is kinked just as it comes out of the drain pan because there is very little clearance (maybe a little over an inch) between the bottom of the AC shelf and the top of the wheelwell. I pulled the hose off the drain pan outlet and went to a hardware store and bought a small plastic elbow that the hose would fit on and that would fit onto the drain outlet. It was close quarters but I put some RTV sealant on the fittings and then worked the elbow onto the drain outlet. Be sure to route the hose so that it goes out the bottom of the trailer without any more kinks.
Joe
__________________
Joe from Virginia
|